Otsingu tulemused

Thermally moulded plastic parts - Import eksport

30 Ettevõtted

0 Tooted

FRANZ FISCHLER GMBH & CO. KG

Saksamaa

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Veebilehe
GW BATTERIEN GMBH

Saksamaa

As an innovative and flexible company, not only do we develop, build and supply battery systems using NiCd, lead and Li-ion technology, we also solve problems for a wide range of applications in the area of railway vehicle batteries and stationary battery systems. In combination with our extensive services, from reconditioning, storage and repairs through to customised leasing offers, we can assist you with our expertise. Our product range is rounded off by special innovations, including those in areas other than battery technology.

Veebilehe
BECHTOLD & SOHN GMBH & CO. KG

Saksamaa

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Veebilehe
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Saksamaa

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Veebilehe
WILHELM-PLASTIC GMBH & CO KG

Saksamaa

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Veebilehe

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Saksamaa

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Veebilehe
SCHAUENBURG INDUSTRIETECHNIK GMBH

Saksamaa

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Veebilehe
BÄCKER GMBH & CO. KG

Saksamaa

Bäcker has been a manufacturer and supplier of technical standard parts and control elements made of plastic and metal, as well as individual solutions made of plastic for industry, for more than 40 years. The wide product range of more than 5000 items with a total of 23, 000 different variants and dimensions of standard products from the three series PlacoGrip®, PlacoTec® and PlacoCap®. Overview of our product series. PlacoGrip® – control elements (knobs, levers, hinges, etc.). PlacoTec® – standard elements (DIN screws, nuts, washers made of plastic, etc.). PlacoCap® – protective elements (caps, plugs, sanitary fastenings, etc.) We manufacture products for leading industrial companies from a variety of sectors: Electrical engineering electronics, medical technology, machinery and systems engineering, the automotive industry, the chemical industry, shipbuilding, the leisure and sports equipment industry, the sanitary industry and rehabilitation equipment.

Veebilehe
GEBR. W. + H. ZAUGG AG

Šveits

In over 70 years, Gebr. W. + H. Zaugg AG has built up expertise that is unique. Only this way can perfect products be produced, which withstand the technically demanding market of today. Innovation and precision are essential in mould construction and injection moulding. We act and work accordingly every day to give our customers the best. The company Gebr. W. + H. Zaugg AG is a family business owned by Bettina Ulrich-Zaugg and Stephan Ulrich. We are your partner for perfect plastic parts, mould construction, production of individual parts, 3D printing and servicing.

Veebilehe
BIO-RAD - ÉTABLISSEMENT DE GÉMENOS (ANCIENNEMENT PLASTIFRANCE)

Prantsusmaa

For over 60 years Plastifrance has designed, manufactured and sold plastic components for aeronautics, medicine, the car industry, etc. Our values are industrial excellence, quality service and innovation for parts perfectly suited to your applications. We manufacture plastic components by injection (plastic stops, plastic caps, sleeves and covers) to protect your parts during transport, surface treatment and finish (handles, nozzles …) and wiring management (cable glands, grommets, covers, clips and rivets…).

Veebilehe

LOUVRETTE GMBH VERPACKUNG + DESIGN

Saksamaa

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Veebilehe
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Saksamaa

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Veebilehe

PLS GMBH

Saksamaa

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Veebilehe
ACKOR MOULD LIMITED

Hiina

Founded in Dongguan, China, in 2003, Ackor Mould Limited has dedicated the past two decades to collaborating closely with customers to provide optimal solutions for injection tools and molding products. Our comprehensive services encompass everything from mold manufacturing and injection molding production to final product assembly. Key markets include Japan, the EU, and America, where we've established robust partnerships due to the trust bestowed upon us by our valued customers. With extensive experience spanning various industries such as automotive, medical, electronics, cosmetics, and electrical, Ackor Mould Limited has emerged as a trusted provider. Our proficiency extends beyond injection tooling to services like CNC machining, Silicone Moulding, Rubber Moulding, Metal Pressing, and Plastic Vacuum Forming. From humble beginnings, Ackor Mould Limited has grown substantially by adhering to core principles of quality and competitive pricing. Our commitment is evident in our relentless pursuit of meeting customer requirements and delivering cost-effective products of the highest standards, from the initial inquiry through production to timely delivery. Specializing in injection mold toolmaking for over two decades, Ackor Mould has earned a stellar reputation in the domestic and overseas injection tooling industry. Our expertise is showcased in the diverse sectors we serve, including automotive, medical, electronics, cosmetics, and electrical.

Veebilehe
N&H TECHNOLOGY GMBH

Saksamaa

Ettevõte N&H TECHNOLOGY GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Data transmission cables, specially prepared, Membrane keyboards (complete solutions), Rubber precision moulded parts, Plastic moulded parts, Plastic moulded parts, customer-specific, Plastic Housings, Assemblies, electromechanical, Push buttons (switches), JA Spring contacts tööstustes. See asub Willich, Saksamaa.
PROCESS THERMOPLASTIC

Prantsusmaa

Ettevõte PROCESS THERMOPLASTIC, on Alltöövõtja, aastal ja mis tegeleb Plastmaterjalide vormimine tööstuses. See tegeleb ka Plastic injection, Plastic injection mould, plastic injection moulding, Plastics manufacturing, bi-material plastic injection, bi-material plastic moulding, bi-material plastic parts, Plastic parts, JA plastic injection tools tööstustes. See asub Challans, Prantsusmaa.
BUCK SPRITZGUSSTEILE FORMENBAU GMBH

Saksamaa

Ettevõte BUCK SPRITZGUSSTEILE FORMENBAU GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Plastic injection moulded parts, Injection-moulded plastic parts, Plastic parts for the car industry, Plastic parts for electronic equipment, Precision plastic injection moulded parts, Injection-moulded parts, technical, JA pad printing tööstustes. See asub Flachslanden, Saksamaa.
PLÁSTICOS CLOSSA

Hispaania

Ettevõte PLÁSTICOS CLOSSA, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Tempelprintimine, Plastmaterjalide töötlemine, Plastic injection, Plastic injection mould, Tempelprintimine, Injection moulding machine, Assembly of parts, Plastic transformation, JA plastic injection moulds tööstustes. See asub Lezo, Hispaania.
HIRT METALL-UND KUNSTSTOFFTECHNIK

Saksamaa

Ettevõte HIRT METALL-UND KUNSTSTOFFTECHNIK, on Valmistaja/ Tootja, aastal ja mis tegeleb Teras ja metall - valtsimine ja lõikamine tööstuses. See tegeleb ka Treimine - teras ja metall, Freesimine - teras ja metall, Metalligraveerimine - tööpingid, stamping parts, Torsion springs, Plastics engineering, Mechanical jacks, spring plungers, JA Ball tensioning screws tööstustes. See asub Triberg, Saksamaa.
KORNFELD ANTON ING. GESMBH &CO KG

Austria

Ettevõte KORNFELD ANTON ING. GESMBH &CO KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Valtsimine - teras ja metall tööstuses. See tegeleb ka Plastmassid - tööstuslikud toormaterjalid, Keraamilised vormid, Freesimine - teras ja metall, Plastmassi- ja kummitööstuses kasutatavad vormid, Plastist pooltooted, Plastmaterjalide töötlemine, tool manufacturing, Tool manufacture for injection moulded components, JA Plastmassid - tööstuslikud toormaterjalid tööstustes. See asub Günselsdorf, Austria.

SNK PLASTIC

Prantsusmaa

Ettevõte SNK PLASTIC, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Tööstushooldus, Plastic injection, injection moulding, Mould making workshop, tool manufacturer, modification of tools, plastic injection tools, Plastic injection mould, JA injection mould tööstustes. See asub Saint Genix Sur Guiers, Prantsusmaa.
SKS METAPLAST SCHEFFER-KLUTE GMBH

Saksamaa

Ettevõte SKS METAPLAST SCHEFFER-KLUTE GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Liquid coolant couplings for motor vehicles, Assemblies for the automotive industry, Plastic assemblies, Plastic moulded parts, reinforced with glass fibre, plastic hoses, Plastic parts for the automotive industry, Plastics manufacturing, Assembly of plastic components, JA Extruded pipes tööstustes. See asub Sundern, Saksamaa.
HA-WI KUNSTSTOFFE GMBH & CO. KG

Saksamaa

Ettevõte HA-WI KUNSTSTOFFE GMBH & CO. KG, on Valmistaja/ Tootja, aastal ja mis tegeleb Tööstuslikud plasttooted tööstuses. See tegeleb ka Coat racks, Plastic cover caps, Plastic spacers, Injection-moulded plastic parts, Plastic threaded plugs, Plastic edge protection profiles for packaging purposes, Plastic moulded parts, Plastic moulded parts, reinforced with glass fibre, JA Plastic moulded parts, customer-specific tööstustes. See asub Bad Laasphe, Saksamaa.
WETEC GMBH

Saksamaa

Ettevõte WETEC GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Plastic assemblies, Plastic precision parts, Plastic injection-moulded parts, Technical-grade plastic parts, Plastics processing, Prototype construction, Injection moulding tools for plastics, injection moulds, JA Injection-moulded parts made from thermoplastics tööstustes. See asub Schweppenhausen, Saksamaa.
ELMEG

Itaalia

Ettevõte ELMEG, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastist pooltooted tööstuses. See tegeleb ka Plastmaterjalide vormimine, Blow-moulded plastic components assembly, manufacture of plastic articles, Blow-moulded plastic parts for automobiles, Plastmaterjalide vormimine, mould design, JA blow moulding plastic materials tööstustes. See asub Isola D'asti, Itaalia.
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Saksamaa

Ettevõte WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU, on Valmistaja/ Tootja, aastal ja mis tegeleb Plastmaterjalide töötlemine tööstuses. See tegeleb ka Assembly of plastic components, Plastics manufacturing, Plastic surfaces, In-mould decoration (IMD), injection moulding, Plastic injection parts, Plastic assemblies, Injection moulded plastic parts with metal insert, JA Plastic moulded parts, reinforced with glass fibre tööstustes. See asub Dillenburg, Saksamaa.
FT-TEC GMBH

Austria

Ettevõte FT-TEC GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Mereohutussüsteem tööstuses. See tegeleb ka Laevaelektroonika, Insenerid - tööstuskonsultandid, Plastigraanulid, Plastic granulate, Laevaelektroonika, elastomers, injection moulding of plastics, UV pressure, JA 3D measuring tööstustes. See asub Neutal, Austria.
FILTRUM GMBH

Saksamaa

Ettevõte FILTRUM GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Gaasifiltrid tööstuses. See tegeleb ka Strainer, Metal filters, General filters, Basket strainers, Filter screens, Filter elements, Filter inserts, Filters for wastewater treatment technology, JA Fine filters tööstustes. See asub Hemer, Saksamaa.
MPI EUROPE GMBH

Saksamaa

Ettevõte MPI EUROPE GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Kummi ja plasti pritsevormimine tööstuses. See tegeleb ka Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, JA Plastic components for medical technology tööstustes. See asub Doebeln, Saksamaa.
HEBMÜLLER GMBH

Saksamaa

Ettevõte HEBMÜLLER GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Tihendid tööstuses. See tegeleb ka Filter screens, Filter screens, Plastic filters, Basket strainers, Stainless steel sieves, Filter screens with stainless steel mesh, Injection moulded plastic parts with filter mesh insert, Elastomer frame seal, JA R-ring DIN 34110 SH P tööstustes. See asub Meerbusch, Saksamaa.

Leidke hinnapakkumisi

Filtrid

Otsingu tulemused

Thermally moulded plastic parts - Import eksport

Tulemuste arv

30 Ettevõtted