Otsingu tulemused

Plastic moulded parts

10 Ettevõtted

0 Tooted

TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Saksamaa

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Veebilehe
PLS GMBH

Saksamaa

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Veebilehe
BRUGGER GMBH MAGNETSYSTEME

Saksamaa

As a leading manufacturer of permanent magnetic components, we have offered all our products and services from a single source since 1963. From the development, design and manufacturer of our own tools and products, the production of individual stamped and drawn parts, as well as plastic injection moulding parts, through to the installation of the magnet systems, everything is located at one site in Hardt. With a modern machine fleet, innovative product concepts and a high level of expertise in consultancy, we manufacturer several million magnet systems "Made in Germany" every year. An extensive inventory of standard products enables rapid and flexible order processing. This means that it is possible to supply everything from small individual parts to large series parts. The application areas for the permanent magnetic components range from the automotive industry, the lighting and medical equipment industry and the building sector to decorative applications and name badges.

Veebilehe
ARCOTEC GMBH

Saksamaa

With almost 50 years’ experience, Arcotec GmbH enjoys success as the sole manufacturer of all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). 2019 - With over 45 years’ experience, Arcotec GmbH continues to enjoy success as the sole manufacturer all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). Over 15, 000 Arcotec pretreatment systems in use worldwide are a testimony to our consistently high quality and unique know-how in the field of surface pretreatment. 1997 - Introduction of the atmospheric plasma machine (Arcospot®), which distributes high-energy spark discharges. The introduction of the atmospheric plasma machines in particular opened up the market for materials that are difficult to treat at high feed rates. 1991 - Another physical treatment principle, “flame treatment”, was introduced. 1985 - Arcotec GmbH was founded. Pretreatment systems 1976 - Development and deployment of the world’s first plasma machine with open jet electrodes (Arcojet®) for treating plastic moulded parts; this works with electric plasma. Pretreatment systems 1975 - Production of the pretreatment machines begins using high-frequency corona. Pretreatment systems 1974 - Fritz Bloss founded an independent commercial agency.

Veebilehe
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Saksamaa

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Veebilehe

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

SAXONIA-FRANKE GMBH & CO. KG

Saksamaa

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Veebilehe
RICHTER FORMTEILE GMBH

Saksamaa

Having production sites around the world enables us to make use of individual skills and local traditions, which guarantees maximum quality and cost efficiency. Thanks to our experience with and expertise in various different casting methods, we can always offer you the optimal solution: Precision casting, sintering, MIM, sand casting, gravity die casting, closed die forging, plastic injection moulding and assemblies – including processing and surface treatment. Our staff will be happy to offer you professional advice for developing components; we will also gladly prefinance your goods and keep them in storage. You don't have to worry about legal matters with international suppliers either: As your German legal partner, we will take care of everything. Place your trust in 30 years of experience and technical expertise – for precision at its most efficient.

Veebilehe
HIRT METALL-UND KUNSTSTOFFTECHNIK

Saksamaa

Ettevõte HIRT METALL-UND KUNSTSTOFFTECHNIK, on Valmistaja/ Tootja, aastal ja mis tegeleb Teras ja metall - valtsimine ja lõikamine tööstuses. See tegeleb ka Treimine - teras ja metall, Freesimine - teras ja metall, Metalligraveerimine - tööpingid, stamping parts, Torsion springs, Plastics engineering, Mechanical jacks, spring plungers, JA Ball tensioning screws tööstustes. See asub Triberg, Saksamaa.
SCHOCK GROUP

Saksamaa

Ettevõte SCHOCK GROUP, on Multi-Category, aastal ja mis tegeleb Rööpad - mustmetallist tööstuses. See tegeleb ka Sahtlite jooksuliistud, Telescopic rails, Assemblies, Assembly production, Ball guides, Plastic injection-moulded parts, Powder coatings, Injection-moulded parts, JA special profiles tööstustes. See asub Urbach, Saksamaa.
ADOMA GMBH

Saksamaa

Ettevõte ADOMA GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Tööstuslikud plasttooted tööstuses. See tegeleb ka Tööstuslikud plastmassi tootmise masinad ja seadmed, Technical moulding of plastic parts, Plastic parts, Tööstuslikud plastmassi tootmise masinad ja seadmed, JA Promotional items and products made from plastic tööstustes. See asub Wangen Im Allgäu, Saksamaa.

Leidke hinnapakkumisi

Filtrid

Otsingu tulemused

Plastic moulded parts

Tulemuste arv

10 Ettevõtted