Vabandame, kuid seda brauserit või teie brauseriversiooni ei toetata. Paremaks sirvimiseks soovitame teil brauserit uuendada. vaadake lisaks

Otsingu tulemused

Lehtvedrud - Import eksport

104 ettevõtted

0 Tooted

P.J. PRAUSE DUROTEC GMBH

Saksamaa

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Veebilehe
SCHNORR GMBH

Saksamaa

We manufacture disc springs, safety washers and load washers, wave springs and stamped parts made of spring steel. SCHNORR® products are the top choice for any application whereby metal – thanks to its strength and shape – can fulfil demanding the functions of "move, cushion and secure". As a pioneer in disc spring applications, Adolf Schnorr founded the owner-managed family company in 1908. SCHNORR® has grown into an international leading troubleshooter in the area of disc springs and screw and bolt locking devices with sales branches all over the world. In addition to many years of experience in stamping and turning, the company also has the technology to perform precision blanking operations, the expertise to manufacture distortion-sensitive disc springs, as well as a further product group – made-to-order wave springs.

Veebilehe
BKM PRÄZISIONSWERKZEUGE STANZ UND BIEGETEILE GMBH

Saksamaa

We are specialists in sizing and manufacturing stamped and punched parts which are suitable for manufacturing, including designing and constructing the tools required for this purpose. Our range of processing services includes copper/copper alloys, brass, steel/stainless steel and aluminium. Our specialists can translate your design requirements into reality at our four workshops which have over 50 punching machines, six punching units and additional equipment for threads, assembling and laser welding which can be integrated, as well as devices for vibratory grinding, polishing and tempering. BKM's manufacturing depth is extremely high, meaning that we can always undertake the core processes for tool and part manufacturing ourselves. Small and medium series production are part of our key areas of expertise thanks to our BIHLER BNC manufacturing systems in the field of punching. We manufacture large series on punching machines, typically with camera surveillance and 24/7 operation with automatic container changers, if required.

Veebilehe
FEDERNFABRIK SUBTIL GMBH - (SUBTIL GROUP)

Saksamaa

With over 360 employees at three locations, the Subtil Group manufactures technical springs of all kinds, such as compression springs, tension springs, torsion springs, locking/spring sleeves as well as wire parts and stampings/bending parts of the highest quality. Together with our high-performance partners in the area of finishing services, such as surface treatment, we offer our customers a wide range of products in these areas from a single source: Compression springs from 0.10 mm to a max. wire diameter of 12 mm. Tension/torsion springs from 0.20 mm to a max. wire diameter of 12 mm. Wire parts made of wires from 0.20 mm to a max. wire diameter of 12 mm in round and profile wire. Strip and stampings/bending parts from a material thickness of 0.2 to 3 mm and a material width of up to 100 mm

Veebilehe
ZIMMERMANN TECHNISCHE FEDERN GMBH

Saksamaa

ZIMMERMANN Technische Federn is an expert development and series supplier of springs and assemblies for complex applications. ZIMMERMANN Technische Federn GmbH has its registered office in Leutersdorf, where the borders of three countries meet. The Zimmermanns have over 100 years' experience in developing and manufacturing complex spring systems. Over the years, a strong relationship of trust has been built up between customers, employees and the management. The product range spans from compression, draw and torsion springs to bent wire parts, bent strip parts, complex plate and spiral springs through to diverse assemblies. Nothing's impossible! ZIMMERMANN Technische Federn GmbH has very high expectations of itself and of the quality of its spring systems. Thanks to the excellent training of employees, ZIMMERMANN has developed extensive expertise in its specialist area.

Veebilehe

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

KESSEN RESSORTS

Belgia

Ressorts Kessen is a company specialised in the design and manufacture of industrial springs, the assembly of parts and assembled wires. Compression springs, draw springs, torsion springs, leaf and spiral springs, all parts without wire. Cold manufacturing and hot manufacturing for diameters between 0.1mm to 60mm. Our main fields of activity are: steel making, electronics, aviation, food industry, etc.

Veebilehe
JOHANN VITZ GMBH & CO. KG

Saksamaa
RWU INDUSTRIEFEDERN & GUMMITECHNIK GMBH

Saksamaa
ALFRED WEIGEL FEDERNFABRIK GMBH & CO. KG

Saksamaa
EMIL HEMBECK GMBH & CO. KG

Saksamaa