Otsingu tulemused

Calibrating - Import eksport

240 Ettevõtted

0 Tooted

MELUTEC METROLOGY GMBH

Saksamaa

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Veebilehe
MAGTROL

Šveits

Magtrol is an international company, recognized as a leader in manufacturing various sensors, test equipment and customized motor test bench. Since 1953, Magtrol develops and supplies products for measurement and control of torque-speed-power, load-force-weight and displacement. MAGTROL INC, which is headquartered in Buffalo NY (USA), is a leading manufacturer of motor test equipment and hysteresis brakes and clutches. MAGTROL SA, located in Rossens (Switzerland), also offers motor test equipment as well as products to measure, control and monitor load-force-weight and displacement. Magtrol offers customers a wide array of measurement and control solutions, combined with a high quality worldwide sales and service network. Today, the company employs approximately 200 collaborators around the world, committed to providing innovative and personalized solutions.

Veebilehe
HÖNTZSCH GMBH

Saksamaa

Ettevõte HÖNTZSCH GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Väljundi ja voo mõõte- ja reguleerimisseadmed tööstuses. See tegeleb ka Plahvatuskindlad seadmed, Rõhumõõtmisseadmed ja -instrumendid, Air flow meter, Calibration service, calibrating, Development of flow meters, Flow meter, Sensors for explosion protection areas, JA sensors tööstustes. See asub Waiblingen, Saksamaa.
CEH CALIBRATION ENGINEERING HOHMANN

Saksamaa

Ettevõte CEH CALIBRATION ENGINEERING HOHMANN, on Valmistaja/ Tootja, aastal ja mis tegeleb Kalibreerimisseadmed tööstuses. See tegeleb ka Mõõtmine – aparaadid ja instrumendid, Mõõtmine – aparaadid ja instrumendid, 3D measuring machine calibration, couplings, JA calibrating tööstustes. See asub Mömlingen, Saksamaa.
BLATT MTS

Saksamaa

Ettevõte BLATT MTS, on Teenuseosutaja, aastal ja mis tegeleb Meditsiiniseadmed tööstuses. See tegeleb ka calibrating, JA thermography tööstustes. See asub Haibach, Saksamaa.

Lehekülg teie ärile

Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.

Lisa minu äri

CHANGSHA PANRAN COMMERCE AND TRADE CO., LTD

Hiina

Ettevõte CHANGSHA PANRAN COMMERCE AND TRADE CO., LTD, on Valmistaja/ Tootja, aastal ja mis tegeleb Mõõtmine – aparaadid ja instrumendid tööstuses. See tegeleb ka Temperature calibrators, calibrating, instrument calibration, JA measuring instruments tööstustes. See asub Hunan, Hiina.
FRANZ WOHL + PARTNER PRÜFMASCHINEN GMBH

Saksamaa

Ettevõte FRANZ WOHL + PARTNER PRÜFMASCHINEN GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Kalibreerimisseadmed tööstuses. See tegeleb ka materials testing, special machines, machine building, JA calibrating tööstustes. See asub Schalkau, Saksamaa.
MAHR GMBH

Saksamaa

Ettevõte MAHR GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Mõõtmine – aparaadid ja instrumendid tööstuses. See tegeleb ka metrology, interferometry, calibrating, JA Optic meters tööstustes. See asub Göttingen, Saksamaa.
PINAR SU SAN. VE TIC. A.S.

Türgi

Ettevõte PINAR SU SAN. VE TIC. A.S., on Valmistaja/ Tootja, aastal ja mis tegeleb Joogid tööstuses. See tegeleb ka calibrating tööstustes. See asub Izmir, Türgi.
360 INT WHOLESALES

Türgi

Ettevõte 360 INT WHOLESALES, on Hulgimüüja, aastal ja mis tegeleb Karastusjoogid tööstuses. See tegeleb ka Joogid, energy drinks, wholesale beverages, Joogid, JA calibrating tööstustes. See asub Izmir, Türgi.

MACBEN

Belgia

Ettevõte MACBEN, on Valmistaja/ Tootja, aastal ja mis tegeleb Testseadmed tööstuses. See tegeleb ka couplings, concrete products, Steel, structural, JA calibrating tööstustes. See asub Temse, Belgia.
KSW KALIBRIERSERVICE JÜRGEN WOZNIAK

Saksamaa

Ettevõte KSW KALIBRIERSERVICE JÜRGEN WOZNIAK, on Teenuseosutaja, aastal ja mis tegeleb Kalibreerimisseadmed tööstuses. See tegeleb ka grading, calibrating, metrological laboratory, JA metrology tööstustes. See asub Berlin, Saksamaa.

FGQ-CONTROL GMBH KALIBRIERDIENST FÜR MECHANISCHE, ELEKTRISCHE UND PHYSIKALISCHE MESSGRÖSSEN

Saksamaa

Ettevõte FGQ-CONTROL GMBH KALIBRIERDIENST FÜR MECHANISCHE, ELEKTRISCHE UND PHYSIKALISCHE MESSGRÖSSEN, on Teenuseosutaja, aastal ja mis tegeleb Metallurgia ning raua- ja terasetööstus - masinad ja sisseseade tööstuses. See tegeleb ka Kvaliteedikontroll ja sertifitseerimine, Calibration services for industry, Kvaliteedikontroll ja sertifitseerimine, JA calibrating tööstustes. See asub Furtwangen, Saksamaa.
KÖSTER & CO. GMBH

Saksamaa

Köster manufactures stud welding and fastening technology using their in-house production facility for stud welding machines and equipment, welding studs, shear studs and cold formed parts. KÖCO offers you a wide range of solutions for any applications in a variety of sectors: Building/steel/bridge construction, power plant/energy generation construction, vehicle/rail construction, plant/machine construction, shipbuilding, fire retardant construction. Thanks to our well-founded technical expertise and our drive to innovate, we create safe, efficient solutions. Our studs and stud welding technology are used all over the world thanks to our reputation as a reliable partner in the stud welding technology sector. We use our extensive knowledge of materials, products and processes to guarantee the necessary safety requirements are met. So that you can be sure that you are using the right KÖCO products in the right applications, we are also happy to provide on-site technical support when it comes to your tasks.

Veebilehe
MECASEM

Prantsusmaa

Ettevõte MECASEM, on Teenuseosutaja, aastal ja mis tegeleb Ülitäpsed mõõtevahendid tööstuses. See tegeleb ka Toodete ja materjalide testimine, Mõõtmine – aparaadid ja instrumendid, metrology, metrology laboratory, metallography, instrument calibration, Measuring equipment, Non-destructive control, JA Toodete ja materjalide testimine tööstustes. See asub Ostwald, Prantsusmaa.
OETIKER DEUTSCHLAND GMBH

Saksamaa

Ettevõte OETIKER DEUTSCHLAND GMBH, on Valmistaja/ Tootja, aastal ja mis tegeleb Raud- ja teraslatid tööstuses. See tegeleb ka fastening clamp, Ear clamps, Hose clips, Screw clamps, Universal clamps, Tape clamp, Multi crimp rings, Quick connectors, JA SMILe® compact quick connectors tööstustes. See asub Endingen, Saksamaa.
ROHRBEARBEITUNG KETTERER

Saksamaa

Ettevõte ROHRBEARBEITUNG KETTERER, on Valmistaja/ Tootja, aastal ja mis tegeleb Valtsimine - teras ja metall tööstuses. See tegeleb ka Pipe processing, parting, saws, Abrasive cutting discs, Tool manufacturing, machine building, Special materials, Machining services, JA Production runs tööstustes. See asub Solingen, Saksamaa.
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG

Saksamaa

With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring. burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001: 2015. burster supplies 7500 customers worldwide. burster’s innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks. burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers’ needs.

Veebilehe
CHEMEC GMBH

Saksamaa

WE ARE YOUR EXPERIENCED PARTNER FOR GAS ANALYSIS. CHEMEC was founded in 2000 as an engineering firm for chemical measurement technology. We have many years of experience in using gas sensors in biogas analysis, especially in the field of thermal conductivity sensors and electrochemical gas sensors. OUR TECHNOLOGY OFFERS THE HIGHEST RELIABILITY. WE ENSURE YOUR SUCCESS WITH OUR CONSULTATION AND SERVICE. No matter whether it concerns fermentation processes in agricultural biogas plants or in industrial or local sewage treatment plants, exact and highly reliable gas analysis is crucial for the optimal functioning of plants. We have been developing and manufacturing gas analysis equipment based on our own technologies for around 20 years.

Veebilehe
B + B THERMO-TECHNIK GMBH

Saksamaa

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Veebilehe

INOTECH METER CALIBRATION SYSTEMS GMBH

Saksamaa

Over the last 25 years, inotech GmbH has developed into a leading manufacturer of test equipment for gas meters, testing facilities and calibration facilities and has a reputation as an expert and reliable partner for meter manufacturers and independent test centres throughout the world. In the last few years, we have also established ourselves in the water meter and heat meter test equipment area, thus adequately expanding our product range. Millions of different types of meters and counters are calibrated using our test equipment every year. Test equipment is our core business. Every day, we combine our expertise with our customers' requirements in order to continuously improve our products. In this way, we always have our customers in focus during the entire product development and production process and are always up to date with current developments.

Veebilehe
OPTRIS GMBH

Saksamaa

Optris: Your partner for infrared temperature measuring technology. Since its foundation in 2003, Optris GmbH has developed into one of the leading and most innovative manufacturers of measuring equipment in the area of non-contact temperature measurement. Our product range includes portable and stationary industrial thermometers and infrared cameras. Optris GmbH was founded with the aim of increasing the range of non-contact temperature sensors with innovative measurement and application principles. Optris thus combines high-quality infrared thermometers and thermal imagers – made in Germany – with competitive prices. Our goal is to provide state-of-the-art infrared technology for as many customers as possible. The majority of our basic technology has its roots in semiconductor products. In order to provide our customers with progressive technology, Optris collaborates with manufacturers from the semiconductor industry.

Veebilehe
GFU MASCHINENBAU GMBH

Saksamaa

Engineering the Future – Gesellschaft für Umformung und Maschinenbau GmbH. As early as 1989, GFU Maschinenbau GmbH has been developing and implementing tailor-made concepts according to customer requirements. With well-founded expertise, innovative technology and proven quality, different GFU forming processes are combined with each other. GFU offers excellent concepts for hot forming as well as for cold forming. Customers from the automotive industry, aviation, oil and gas exploration, construction industry and other industries trust in solid plants made by GFU.

Veebilehe
IL METRONIC SENSORTECHNIK GMBH

Saksamaa

The company was founded in 1992 with just nine employees and built upon a 30-plus year tradition of manufacturing glass feedthroughs. This particular business sector has evolved in to the company's core business, creating customer-specific applications in the field of pressure sensors, humidity sensors and UV sensors in line with market demands. Innovative applications in the medical field or in corrosive environments use stainless steel as well as titanium or Inconel to make turned parts. In the UV and humidity sensor sectors, we develop, produce and distribute sensors, sensor modules and electronic equipment. We currently offer a complete range of UV sensors, measuring windows, UV display devices and reference measuring devices, in particular for the market of UV disinfection for drinking water, utility water and ballast water on ships. In 1996, the company was certified in accordance with DIN EN ISO 9001 and also became qualified to provide training.

Veebilehe
CETEC SYSTEMS SONDERMASCHINEN- VERTRIEBS GMBH

Austria

The way to make contacts. PROJECT PLANNING We implement sophisticated applications in the fields of cable technology and electronics production using tailored solutions to lower your costs in the long term. We coordinate with you on every step of the project to ensure you achieve your objective. PROCESS OPTIMISATION To maximise output of your production line, we analyse the quality of your processes. We tell you how you can optimise your processes and guide you through all the stages of implementation. EXPERT ADVICE We wade through the jungle of possible applications so you don't have to, and provide the ideal solutions for your specific application scenario. That makes your decision easy, thereby avoiding high investment costs. EXPERT SUPPORT We keep you up to date with new processing methods to ensure that your products retain their appeal to your customers. We train your employees to make sure they are up to speed with the latest technologies.

Veebilehe
ATLAS MATERIAL TESTING TECHNOLOGY GMBH

Saksamaa

For more than 100 years, Atlas has been the pioneer in continually developing new solutions in order to assist companies in testing the durability of their products. From our first instrument in 1915 (the Solar Determinator), which simulated the fading effect the sun has on fabric, through to today's comprehensive network of weathering – a range of services and products for materials testing – our focus has remained the same. We offer our customers sophisticated technologies and advanced testing solutions so that they can determine the durability of their products. As a result, our customers can reach their ultimate goals: Quality products, competitive advantages and faster times to market. We help our customers to develop testing programmes with which they can obtain the data they need to make the right decisions relating to the material performance of their products.

Veebilehe
TIRA GMBH

Saksamaa

TIRA GmbH is a global supplier of measuring and testing systems for industry and research. We develop and manufacture modern systems and application-oriented software to simulate environmental influences, to test the properties of materials and to detect and eliminate unwanted vibrations. We manufacture and provide: Balancing machines for motor armatures, tools, articulated shafts, fans and crankshafts; electromechanical manufacturing and special-purpose machines, spindle machines, universal testing machines, modernisation of testing machines and calibration in accordance with the DAkkS (German Accreditation Body); electrodynamic vibration test systems, vibration exciters (shaker units), modal test systems, modal shakers, modal exciters, inertial shakers, long-stroke vibration test machines, vibration control systems for sine, random, shock and mixed modes, linear or hydrostatically guided slip tables, calibration systems, digital and analog amplifiers; machine and machine tool construction and mechanical engineering.

Veebilehe
M-PULSE GMBH & CO. KG

Saksamaa

M-Pulse is an effective partner for matters relating to magnetisation as well as calibration and measurement of magnets and magnetic systems. Thanks to our many years of experience, cost-effective manufacturing and rapid delivery times, we can help you find the magnetic solutions you are looking for. We are able to develop custom magnetisation systems in close collaboration with your development and manufacturing teams. Our products are distinguished by their high currents and extremely short cycle times. For this reason, we place a particular emphasis on reliability and safety. M-Pulse makes optimum use of its production sites in Germany, Singapore and Taiwan for the benefit of its customers. By manufacturing in Taiwan and Singapore, we are able to optimise costs without compromising on reliability and quality. Delivery times from Singapore are short thanks to our fully equipped workshop, with up to 80% of production taking place in-house. This is where we produce our magnetising coils.

Veebilehe
MINEBEA INTEC GMBH

Saksamaa

Minebea Intec is a leading manufacturer of industrial weighing and inspection technologies. With its headquarters in Hamburg, Germany, for over 150 years the company has been offering products and services which have become synonymous with innovation, performance and reliability. Their product portfolio includes platform scales, load cells, vessel and silo scales, checkweighers, metal detectors, X-ray inspection systems and user-friendly software solutions. With around 1000 employees worldwide, 19 sites and a network of 200 certified international distribution partners, Minebea Intec is a global player in its industry. Having sold more than 90, 000 inspection systems, 350, 000 industrial scales and indicators, around 1, 000, 000 industrial load cells, and services worldwide, the company can be relied upon by its customers and partners from a wide range of industries. Minebea Intec is part of the MinebeaMitsumi Group, one of the leading suppliers of high-precision production components, such as ball bearings and engines, as well as high-quality electronic components, such as sensors, antennae and IoT solutions. The group, based in Tokyo, has around 87, 000 employees worldwide and reported a consolidated net turnover of JPY 988.424 million for 2020 (approx. EUR 7.61 billion).

Veebilehe
CYGNUS INSTRUMENTS LTD

Ühendkuningriik

Ettevõte CYGNUS INSTRUMENTS LTD, on Valmistaja/ Tootja, aastal ja mis tegeleb Ultrahelimõõteseadmed tööstuses. See tegeleb ka Lekkedetektorid, Mõõtmine – aparaadid ja instrumendid, Mõõteriistad ja kontrolliseadmed, Sukeldumisvarustus, Kontroll pakendit avamata, thickness gauges, Lekkedetektorid, Measuring equipment, JA equipment for non-destructive tests on metals tööstustes. See asub Dorchester, Ühendkuningriik.