Saa tarnijaks Saage mitu hinnapakkumist Logi sisse

HANS VAN BONN GMBH

Saksamaa

Factory icon Valmistaja/ Tootja

Teave

Ettevõte HANS VAN BONN GMBH, on Valmistaja/ Tootja, mis asutati 1981, aastal ja mis tegeleb Rõhumõõtmisseadmed ja -instrumendid tööstuses. See asub Duisburg, Saksamaa.

Teised ettevõtted samas tööstuses:

Domain icon Valmistaja/ Tootja

HANS VAN BONN GMBH

Albert-Hahn-Str. 21

47269 Duisburg - Saksamaa

Ettevõtte teave

Peamised arvandmed

  • Ettevõtte suurusjärk
    1 – 10

Organisastoion

  • Asutamisaasta
    1981
  • Ettevõtte liik
    Peakorter
  • Põhitegevusala
    Valmistaja/ Tootja

tegevused

  • Rõhumõõtmisseadmed ja -instrumendid
Office Building Outline icon
Lehekülg teie ärile
Kas näete seda? Teie potentsiaalsed kliendid näevad samuti Liituge meiega ja tehke ennast europages'is nähtavaks.
Lisa minu äri

europages soovitab teil samuti

Valik ettevõtteid, kes on seotud järgmise tegevusalaga:

PETER HIRT GMBH

Šveits

Factory icon Valmistaja/ Tootja

Verified by europages badge

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

PPS (PRESSURE PROFILE SYSTEMS)

Ühendkuningriik

Factory icon Valmistaja/ Tootja

Verified by europages badge

HÖNTZSCH GMBH

Saksamaa

Factory icon Valmistaja/ Tootja

Verified by europages badge

MELUTEC METROLOGY GMBH

Saksamaa

Office Building Outline icon Teenuseosutaja

Verified by europages badge

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Hinnapäring

Looge üks päring ja saage mitu hinnapakkumist kinnitatud varustajatelt.

  • Ainult asjakohased varustajad
  • Andmekaitsenõuetele vastavus
  • 100% tasuta